• 广州青秦禹环保科技有限公司
  • 广州青秦禹环保科技有限公司
  • 广州青秦禹环保科技有限公司

Contact 

Copyright © Guangzhou Qing Qin Yu Environmental Technology Co., Ltd. All Rights Reserved 粤ICP备12071081号

Powered by: www.300.cn guangzhou.300.cn

foot

NEWS

Some matters needing attention in daily use of floor grinder

Classification:
Common problem
2018/05/17
Page view:
[Abstract]:
If there is any abnormal noise in the gearbox, it must be stopped immediately and the cause checked. Continued use will cause damage to other pinion components.
I. the gear oil must be changed after the first 1000 hours of use of all gear boxes, and then the gear oil shall be changed every year;
 
 
 
Symptom: the internal organs of the gearbox are caused by iron fragments due to a running in process required for the first use.
 
 
 
II. All gearboxes shall be handled with care when replacing grinding discs and handling;
 
 
 
III. all gear boxes must be cleaned after each work, and the service life of the floor grinder and oil seal can be extended.
 
 
 
IV. check whether the oil level of the gearbox is normal frequently, and if not, add it in time; (available oil bar detection)
 
 
 
V. pay attention to prevent water from entering the frequency converter and motor when adding water;
 
 
 
6. Correct voltage shall be introduced to the machine;
 
 
 
VII. If there is any abnormal noise in the gearbox, it must be stopped immediately and the cause checked. Continued use will cause damage to other pinion components.